MDT10P72
1. General Description
-PortB<7:4> interrupt on change
-CCP,SCM
This EPROM-Based 8-bit micro-controller use...
MDT10P72
1. General Description
-PortB<7:4> interrupt on change
-CCP,SCM
This EPROM-Based 8-bit micro-controller uses a fully static u A/D converter module:
CMOS technology process to achieve higher speed and
-5 analog inputs multiplexed into one A/D
smaller size with the low power consumption and high noise
converter
immunity. On chip memory includes 2K words of ROM, and
-8-bit resolution
128 bytes of static RAM.
u TMR0 : 8-bit real time clock/counter
2. Features
TMR1 : 16-bit real time clock/count TMR2 : 8-bit clock/counter(internal)
The followings are some of the features on the hardware and software : u Fully
CMOS static design u 8-bit data bus u On chip EPROM size : 2.0 K words u Internal RAM size : 160 bytes
(128 general purpose registers, 32 special registers) u 37 single word instructions
u 4 types of oscillator can be selected by programming option: RC Low cost RC oscillator LFXT Low frequency crystal oscillator XTAL Standard crystal oscillator HFXT High frequency crystal oscillator
u On-chip RC oscillator based Watchdog Timer(WDT) u 22 I/O pins with their own independent direction
control
u 14-bit instructions u 8-level stacks
3. Applications
u Operating
voltage : 2.5 V ~ 5.5 V (PRD Disable)
The application areas of this MDT10P72 range from
4.5 V ~ 5.5 V (PRD Enable)
appliance motor control and high speed auto-motive to low
u Operating frequency : DC ~ 20 MHz
power remote transmitters/receivers, pointing devices, and
u The most fast executio...