MDT2060
1. General Description
This EPROM-Based 8-bit micro-controller uses a fully static CMOS technology process to ac...
MDT2060
1. General Description
This EPROM-Based 8-bit micro-controller uses a fully static
CMOS technology process to achieve higher speed and smaller size with the low power u 4 types of oscillator can be selected by programming option: RC¡ÐLow cost RC oscillator LFXT¡ÐLow frequency crystal oscillator XTAL¡ÐStandard crystal oscillator HFXT¡ÐHigh frequency crystal oscillator
consump-tion and high noise immunity. On chip memory incl-udes 1K words of ROM, and 36 bytes of static RAM.
2. Features
The followings are some of the features on the hardware and software : u u u u Fully
CMOS static design 8-bit data bus On chip EPROM size : 1.0 K words Internal RAM size : 49 bytes (36 general purpose registers, 13 special registers) u u u u u u u 37 single word instructions 14-bit instructions 8-level stacks Operating
voltage : 2.5 V ~ 5.5 V (PRD Disable) 4.5 V ~ 5.5 V (PRD Enable) Operating frequency : DC ~ 20 MHz The most fast execution time is 200 ns under 20 MHz in all single cycle instructions except the branch instruction u u u u u u Addressing modes include direct, indirect and relative addressing modes Power-on Reset Power edge-detector Reset Power range-detector Reset Sleep Mode for power saving 3 interrupt sources: -External INT pin -TMR0 timer -PortB<7:4> interrupt on change
u u u
8-bit real time clock/counter(RTCC) with 8-bit programmable prescaler On-chip RC oscillator based Watchdog Timer(WDT) 13 I/O pins with their own independent direction control
3. Applications
Th...