MIC2026A/76A
Dual-Channel Power Distribution Switches
Features
• 100 mΩ Typical RDS(ON) at 5.0V • 140 mΩ Maximum RDS(ON...
MIC2026A/76A
Dual-Channel Power Distribution Switches
Features
100 mΩ Typical RDS(ON) at 5.0V 140 mΩ Maximum RDS(ON) at 5.0V 2.7V to 5.5V Operating Range 500 mA Minimum Continuous Current per
Channel Short-Circuit Protection with Thermal Shutdown Thermally Isolated Channels Soft-Start Circuit Fault Status Flag with 3 ms Filter Eliminates False
Assertions Under
voltage Lockout (UVLO) Reverse Current Flow Blocking (No “Body Diode”) Circuit Breaker Mode (MIC2076A) Pin Compatible with MIC2026 and MIC2076 Logic-Compatible Inputs Low Quiescent Current
Applications
USB Peripherals General Purpose Power Switching ACPI Power Distribution Notebook PCs PDAs PC Card Hot Swap
General Description
The MIC2026A and MIC2076A are high-side
MOSFET switches optimized for general-purpose power distribution that require circuit protection. The MIC2026A is particularly well suited for USB applications.
The MIC2026A/76A are internally current limited and have thermal shutdown that protects the device and load.
The MIC2076A offers smart shutdown that reduces current consumption in fault modes. When the MIC2076A goes into thermal shutdown due to current limiting, the output is latched off until the switch is reset. The MIC2076A can be reset by removing the load, toggling the enable input or cycling VIN. Both devices employ soft-start circuitry that minimizes inrush current in applications where highly capacitive loads are employed.
A fault status output flag is...