MIC4606
85V Full-Bridge MOSFET Drivers with Adaptive Dead Time and Shoot-Through Protection
Features
• 5.5V to 16V Gate...
MIC4606
85V Full-Bridge
MOSFET Drivers with Adaptive Dead Time and Shoot-Through Protection
Features
5.5V to 16V Gate Drive Supply
Voltage Range Advanced Adaptive Dead Time Intelligent Shoot-Through Protection MIC4606-1: 4 Independent TTL Inputs MIC4606-2: 2 PWM Inputs Enable Input for On/Off Control On-Chip Bootstrap Diodes Fast 35 ns Propagation Times Drives 1000 pF Load with 20 ns Rise and Fall
Times Low Power Consumption: 235 µA Total Quiescent
Current Separate High- and Low-Side Under
voltage
Protection –40°C to +125°C Junction Temperature Range
Applications
Full-Bridge Motor Drives Power Inverters High
Voltage Step-Down Regulators Distributed Power Systems Stepper Motors
General Description
The MIC4606 is an 85V full-bridge
MOSFET driver that features adaptive dead time and shoot-through protection. The adaptive dead time circuitry actively monitors both sides of the full-bridge to minimize the time between high-side and low-side
MOSFET transitions, thus maximizing power efficiency. Anti shoot-through circuitry prevents erroneous inputs and noise from turning both
MOSFETs of each side of the bridge on at the same time.
The MIC4606 also offers a wide 5.5V to 16V operating supply range to maximize system efficiency. The low 5.5V operating
voltage allows longer run times in battery-powered applications. Additionally, the MIC4606’s adjustable gate drive sets the gate drive
voltage to VDD for optimal
MOSFET RDS(ON), which minimizes power lo...