MIC5216
Micrel
MIC5216
500mA-Peak Output LDO Regulator Preliminary Information
General Description
The MIC5216 is an ...
MIC5216
Micrel
MIC5216
500mA-Peak Output LDO Regulator Preliminary Information
General Description
The MIC5216 is an efficient linear
voltage regulator with high peak output current capability, very low dropout
voltage, and better than 1% output
voltage accuracy. Dropout is typically 10mV at light loads and less than 500mV at full load. The MIC5216 is designed to provide a peak output current for startup conditions where higher inrush current is demanded. It features a 500mA peak output rating. Continuous output current is limited only by package and layout. The MIC5216 has an internal under
voltage monitor with a flag output. It also can be enabled or shutdown by a
CMOS or TTL compatible signal. When disabled, power consumption drops nearly to zero. Dropout ground current is minimized to help prolong battery life. Other key features include reversedbattery protection, current limiting, overtemperature shutdown, and low noise performance. The MIC5216 is available in fixed output
voltages in spacesaving SOT-23-5 and MM8™ 8-lead power MSOP packages. For higher power requirements see the MIC5209 or MIC5237.
Features
Error Flag indicates under
voltage fault Guaranteed 500mA-peak output over the full operating temperature range Low 500mV maximum dropout
voltage at full load Extremely tight load and line regulation Tiny SOT-23-5 and MM8™ power MSOP-8 package Low-noise output Low temperature coefficient Current and thermal limiting Reversed-battery protection C...