MIC5370/1
High-Performance Dual 150mA LDO 1.6mm x 1.6mm Thin MLF®
General Description
The MIC5370/1 is an advanced dual...
MIC5370/1
High-Performance Dual 150mA LDO 1.6mm x 1.6mm Thin MLF®
General Description
The MIC5370/1 is an advanced dual LDO ideal for powering general purpose portable devices. The MIC5370/1 provides two independently-controlled, highperformance 150mA LDOs in a tiny 1.6mm x 1.6mm Thin MLF® package.
Ideal for battery-powered applications, the MIC5370/1 offers 2% initial accuracy, low dropout
voltage (155mV @ 150mA) and low ground current (typically 32μA per LDO). The MIC5370/1 can also be put into a zero-off-mode current state, drawing virtually no current when disabled.
When the MIC5371 is disabled an internal resistive load is automatically applied to the output to discharge the output capacitor. This LDO offers fast transient response and high PSRR while consuming a minimum operating current.
The MIC5370/1 is available in fixed output
voltages in a lead-free (RoHS-compliant) 6-pin 1.6mm x 1.6mm Thin MLF® package.
Data sheets and support documentation can be found on Micrel’s web site at: www.micrel.com.
Features
2.5V to 5.5V input
voltage range Two 150mA output current LDOs High output accuracy
– ±2% initial accuracy Low quiescent current – 32µA per LDO Stable with 1µF ceramic output
capacitors Independent enable pins Low dropout
voltage – 155mV at 150mA Thermal-shutdown protection Current-limit protection Output discharge circuit – MIC5371 6-pin 1.6mm x 1.6mm Thin MLF® package
Applications
Camera phones Mobile phones GPS, PMP, PDAs and handhel...