MIC5841/5842
8-Bit Serial-Input Latched Drivers
General Description
Using BiCMOS technology, the MIC5841/5842 integrate...
MIC5841/5842
8-Bit Serial-Input Latched Drivers
General Description
Using Bi
CMOS technology, the MIC5841/5842 integrated circuits were fabricated to be used in a wide variety of peripheral power driver applications. The devices each have an eight-bit
CMOS shift register,
CMOS control circuitry, eight
CMOS data latches, and eight bipolar current-sink Darlington output drivers.
These two devices differ only in maximum
voltage ratings. The MIC5842 offers premium performance with a minimum output breakdown
voltage rating of 80V (50V sustaining). The drivers can be operated with a split supply where the negative supply is down to –20V.
The 500mA outputs, with integral transient-suppression diodes, are suitable for use with lamps, relays, solenoids and other inductive loads.
These devices have improved speed characteristics. With a 5V logic supply, they will typically operate faster than 5 MHz. With a 12V supply, significantly higher speeds are obtained. The
CMOS inputs are compatible with standard
CMOS, PMOS, and NMOS logic levels. TTL or DTL circuits may require the use of appropriate pull-up resistors. By using the serial data output, the drivers can be cascaded for interface applications requiring additional drive lines.
The MIC5840 family is available in DIP, PLCC, and SOIC packages. Because of limitations on package power dissipation, the simultaneous operation of all drivers at maximum rated current might require a reduction in duty cycle. A copper-alloy lead frame provide...