DC to 65GHz Broadband MMIC Low-Noise Amplifier
MMA036AA DC to 65GHz Broadband MMIC Low-Noise Amplifier with PLFX
Features • Integrated PLFX technology:
▪ Allows use o...
Description
MMA036AA DC to 65GHz Broadband MMIC Low-Noise Amplifier with PLFX
Features Integrated PLFX technology:
▪ Allows use of less-expensive coil Very low power dissipation:
▪ 4.5V, 85mA (383mW) ▪ High drain efficiency (38dBm/W) Great 0.04-50GHz performance: ▪ 10.5 ± 1.25dB gain ▪ 14.5dBm Psat, 11dBm P1dB ▪ 5dB noise figure >30dB dynamic gain control Integrated temperature-referenced
power detector output 100% DC, RF, and visually tested Size: 1640x920um (64.6x36.2mil) ECCN 3A001.b.2.d
Description The MMA036AA is a seven stage traveling wave amplifier. The amplifier features Microsemi PLFX (Passive Low Frequency eXtension) circuitry designed to reduce the integration cost of the amplifier. PLFX isolates the amplifier from bias inductor resonances, allowing use of a less-expensive coil.
Application The MMA036AA Broadband MMIC Low-Noise Amplifier with PLFX is designed for high efficiency and low-noise broadband applications in RF and microwave communications, test equipment and military systems. By using specific external components, the bandwidth of operation can be extended below 40MHz.
Key Characteristics: Vdd=4.5V, Idd=85mA, Zo=50Ω Specifications pertain to wafer measurements with RF probes and DC bias cards @ 25°C
Parameter
Description
S21 (dB)
Small Signal Gain
Flatness (±dB)
Gain Flatness
S11 (dB)
Input Match
S22 (dB)
Output Match
S12 (dB)
Reverse Isolation
P1dB (dBm) 1dB Compressed Output Power
Psat (dBm)
Saturated Output Power
NF (dB)
Noise...
Similar Datasheet