MMPF0100

NXP Semiconductors Data sheet: Technical Data 14 channel configurable power management integrated circuit Document Number: MMPF0100 Rev. 18, 7/2019 PF0100 The PF0100 SMARTMOS power management integrated circuit (PMIC) provides a highly programmable/ configurable architecture, with fully integrated power devices and minimal external components. With up to six buck converters, six linear regulators, RTC supply, and coin-cell charger, the PF0100 can provide power for a complete system, including applications processors, memory, and system peripherals, in a wide range of applications. With on-chip one time programmable (OTP) memory, the PF0100 is available in pre-programmed standard versions, or non-programmed to support custom programming. The PF0100 is defined to power an entire embedded MCU platform solution such as i.MX 6 based eReader, IPTV, medical monitoring, and home/factory automation. Features: Four to six buck converters, depending on configuration Single/Dual phase/ parallel options DDR termination tracking mode option Boost regulator to 5.0 V output Six general purpose linear regulators Programmable output voltage, sequence, and timing OTP (one time programmable) memory for device configuration Coin cell charger and RTC supply DDR termination reference voltage Power control logic with processor interface and event detection I2C control Individually programmable ON, OFF, and standby modes POWER MANAGEMENT EP SUFFIX (E-TYPE) 98ASA00405D 56 Q...