MP04DD810
FEATURES s Dual Device Module s Electrically Isolated Package s Pressure Contact Construction s International...
MP04DD810
FEATURES s Dual Device Module s Electrically Isolated Package s Pressure Contact Construction s International Standard Footprint s Alumina (Non-toxic) Isolation Medium
MP04DD810
Dual Rectifier Diode Water Cooled Module Preliminary Information
DS5286-2.1 June 2001
KEY PARAMETERS
VRRM IF(AV) IFSM (per arm) IF(RMS) Visol
3000V 812A 20000A 1276A 3000V
APPLICATIONS s Power Supplies s Large IGBT Circuit 'Front Ends' s Rectifiers s Battery Chargers
VOLTAGE RATINGS
Type Number
MP04DD810-30 MP04DD810-28 MP04DD810-26 MP04DD810-24
Repetitive Peak
Voltages VDRM VRRM V
3000 2800 2600 2400
Conditions
Tvj = –40˚ to 150˚C, VRSM = VRRM + 100V
Lower
voltage grades available
ORDERING INFORMATION
Order As:
MP04DD810-XX-W2 MP04DD810-XX-W3 MP04DD810-XX-W3A
1/4 - 18 NPT connection 1/4 - 18 NPT connection 1/4 - 18 NPT water connection thread
XX shown in the part number about represents VDRM/100 selection required, eg. MP04DD810-28-W2
Note: When ordering, please use the complete part number. Please quote full part number in all correspondance.
1
2
3
Fig.1 DD circuit configuration
Module outline type code: Module outline type code:
MP04-W3
MP04-W3A
www.dynexsemi.com
Module outline type code: MP04-W2 (See Package Details for further information) Fig. 2 Module package variants - (not to scale)
1/9
MP04DD810
ABSOLUTE MAXIMUM RATINGS - PER ARM
Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. This is a stress rating o...
