MP5034
USB Charging Port Controller Integrating QC 3.0 Protocol
DESCRIPTION
The MP5034 supports DCP schemes for battery...
MP5034
USB Charging Port Controller Integrating QC 3.0 Protocol
DESCRIPTION
The MP5034 supports DCP schemes for battery charging specification (BC1.2), divider mode, 1.2V/1.2V mode, and quick-charge specification (QC 3.0) without the need for outside user interaction.
Full protection features include input over
voltage protection (OVP) and thermal shutdown.
The MP5034 requires a minimal number of readily available, standard, external components to complete the USB switch and charging mode auto-detection solution. The MP5034 is available in an 8-pin TSOT23 package.
FEATURES
Wide 3.6V to 14V Operating Input
Voltage Range
Supports QC 3.0 (3.6V - 12Vbus with 1% Accuracy) and DCP Schemes for BC1.2, Divider Mode, and 1.2V/1.2V Mode
Input Discharge during High
Voltage to Low
Voltage Change
Compatible with Buck, Boost, and AC/DC Converters
Available in a TSOT23-8 Package
APPLICATIONS
USB Charger Controller AC/DC Wall Adapter with USB Ports Power Bank Controller
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc.
TYPICAL APPLICATION
Note: Set MP2499M original output to 3.5V by R1 and R2.
VIN 12V-36V
C2 22μF
C3 0.1μF
IN
BST
MP2499M
C4 0.1μF
SW
L1 15μH
IN C1 66μF
MP5034
EN/SYNC
R1
82.5kΩ
DM
FB
ADJ
DP
VCC
R3 33kΩ
R2 24.3kΩ
AGND PGND
ISENSE
EN ...