®
MP
C10
4
MPC104
MP
C10
4
Wide-Bandwidth 2 x 1 VIDEO MULTIPLEXER
FEATURES
q BANDWIDTH: 210MHz (1.4Vp-p) q LOW I...
®
MP
C10
4
MPC104
MP
C10
4
Wide-Bandwidth 2 x 1 VIDEO MULTIPLEXER
FEATURES
q BANDWIDTH: 210MHz (1.4Vp-p) q LOW INTERCHANNEL CROSSTALK: –79dB (30MHz, SO); –77dB (30MHz, DIP) q LOW SWITCHING TRANSIENTS: +13mV/–4mV q LOW DIFFERENTIAL GAIN/PHASE ERRORS: 0.03%, 0.01° q LOW QUIESCENT CURRENT: One Channel Selected: ±4.6mA No Channel Selected: ±120µA The MPC104 consists of two identical monolithic, integrated, open-loop buffer
amplifiers, which are connected internally at the output. The bipolar complementary buffers form a unidirectional transmission path and offer extremely high output-to-input isolation. The MPC104 multiplexer enables the user to connect one of two input signals to the output. The output of the multiplexer is in a high-impedance state when no channel is selected. When one channel is selected with a digital “1” at the corresponding SEL input, the component acts as a buffer with high input impedance and low output impedance. The wide bandwidth of over 210MHz at 1.4Vp-p signal level, high linearity and low distortion, and low input
voltage noise of 5nV/√Hz make this crosspoint switch suitable for RF and video applications. All performance is specified with ±5V supply
voltage, which reduces power consumption in comparison with ±15V designs. The multiplexer is available in a spacesaving 8-pin SO and DIP packages. Both are designed and specified for operation over the industrial temperature range (–40°C to +85°C.)
APPLICATIONS
q VIDEO ROUTING AND MULTIPLEXING (...