MPC560

High Accuracy Analog and Digital I/O for PC/104 MPC560 Features          32 channels of 16-bit analog input Fault protection on analog/digital Ultra-low noise design DSP and noise analysis software Low-pass filtering 14-bit, 4-channel DAC Digital I/O, Counter/Timer 5V only operation from PC/104 Extended temperature range available www.DataSheet4U.com The MPC560 provides up to 32 single-ended 16bit analog inputs that are fault protected to ±40V. The analog input section offers individual channel selection of single-ended or differential modes in any combination. The MPC560 also features basic and autoscan modes. Basic mode directly controls all modes, gains, channel selection, and filters. With autoscan mode, a user can preset individual channel attributes – channel on/off, mode, gain, and lowpass filter in on-board RAM. In autoscan mode, a pacer clock and the DMA controller automatically move samples to system memory. The analog input includes a low-drift reference, noise-protected by a faraday shield. Software Support Example code for all functions C-code/Mathcad™ for advanced algorithms The optional 14-bit analog outputs have fullscale output of ±10.1V. The digital-to-analog converter is noise-protected by a faraday shield. Each output has a 1-pole lowpass filter. Twelve digital I/O lines can be individually set for input or output, with fault protection against power sequencing and static discharge. All analog power supplies are generated from the 5V input. The...