SINGLE PORT INTERFACE
,..,commodore
~ aamlcanduct;ar graup
[t\!][K!A]@~
MPS
6529
SINGLE-PORT
INTERFACE
6529 SINGLE PORT INTERFACE
DESCRIPTI...
Description
,..,commodore
~ aamlcanduct;ar graup
[t\!][K!A]@~
MPS
6529
SINGLE-PORT
INTERFACE
6529 SINGLE PORT INTERFACE
DESCRIPTION
The 6529 is a static microprocessor compatible, 8-bit I/O Port with passive output pull-up devices. Data is written to the port when CS and RNI/ are low. Data is read from the port when CS is low and RNI/ is high. The passive output pull-ups allow a single bit to act as either an input or an output without I/O mode switching.
This device is provided with special circuitry to provide power-on reset. Under normal fast poweron conditions the outputs will initialize in the input high impedance state. With very slow or noisy power-up, there is some possibility the device will initialize with putputs driven low. It is recommended that the 6529 be interfaced to open collector output type devices.
TRUTH TABLE
CS RNI/
00-0 7
L L DATA BUS TO PORT L H PORT TO DATA BUS H X ISOLATION
L = LOW Level H= HIGH Level X =1 rrelevant
ORDER INFORMATION
MXS 6529
L
FREQUENCY RANGE...
Similar Datasheet