MPXM2053

www.DataSheet4U.com Freescale Semiconductor Technical Data Document Number: MPXM2053 Rev 5.0, 05/2006 50 kPa On-Chip Temperature Compensated and Calibrated Silicon Pressure Sensors The MPXM2053 device is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output - directly proportional to the applied pressure. The sensor is a single, monolithic silicon diaphragm with the strain gauge and a thin-film resistor network integrated on-chip. The chip is laser trimmed for precise span and offset calibration and temperature compensation. Features Temperature Compensated Over 0°C to +85°C Available in Easy-to-Use Tape & Reel Ratiometric to Supply Voltage Gauge Ported and Non Ported Options MPXM2053 SERIES COMPENSATED AND CALIBRATED PRESSURE SENSOR 0 TO 50 kPA (0 TO 7.25 psi) 40 mV FULL SCALE SPAN (TYPICAL) MPAK PACKAGES Typical Applications Pump/Motor Controllers Robotics Level Indicators Medical Diagnostics Pressure Switching Non-Invasive Blood Pressure Measurement ORDERING INFORMATION Device Type Options Case No. MPX Series Order No. Packing Options Rails Device Marking MPXM2053D 1 2 MPXM2053D/DT CASE 1320-02 MPXM2053GS/GST1 CASE 1320A-02 Pin Number Gnd +Vout 3 4 VS -Vout Non-ported Absolute, Element Only Absolute, Axial Port Ported 1320 MPXM2053D 1320 MPXM2053DT1 Tape & Reel MPXM2053D Rails MPXM2053G Absolute, Axial 1320A MPXM2053GS Port Absolute, Element Only 1320A MPXM2053GST1 Tape & Reel MPXM2053G © Freescale...