MPXM2102

www.DataSheet4U.com Freescale Semiconductor Technical Data MPXM2102 Rev 4, 09/2005 100 kPa On-Chip Temperature Compensated & Calibrated Silicon Pressure Sensors The MPXM2102 device is a silicon piezoresistive pressure sensors providing a highly accurate and linear voltage output - directly proportional to the applied pressure. The sensor is a single, monolithic silicon diaphragm with the strain gauge and a thin-film resistor network integrated on-chip. The chip is laser trimmed for precise span and offset calibration and temperature compensation. Features Temperature Compensated Over 0°C to +85°C Available in Easy-to-Use Tape & Reel Ratiometric to Supply Voltage Gauge Ported and Non Ported Options MPXM2102 SERIES COMPENSATED AND CALIBRATED PRESSURE SENSOR 0 TO 100 kPA (0 TO 14.5 psi) 40 mV FULL SCALE SPAN (TYPICAL) MPAK PACKAGES Typical Applications Pump/Motor Controllers Robotics Level Indicators Medical Diagnostics Pressure Switching Barometers Altimeters ORDERING INFORMATION Device Type Nonported Options Gauge Gauge Absolute Absolute Ported Gauge, Axial Port Gauge, Axial Port Case No. MPX Series Order No. Packing Options Rails Device Marking MPXM2102D 1 2 MPXM2102D/A CASE 1320-02 MPXM2102GS/AS CASE 1320A-02 Pin Number Gnd +Vout 3 4 VS -Vout 1320 MPXM2102D 1320 MPXM2102DT1 1320 MPXM2102A 1320 MPXM2102AT1 1320A MPXM2102GS 1320A MPXM2102GST1 Tape & Reel MPXM2102D Rails MPXM2102A Tape & Reel MPXM2102A Rails MPXM2102G Tape & Reel MPXM2102G Rail...