MS7907
PRESSURE SENSOR DIE (0-7 BAR)
• 0 to 700 kPa range (7 bar or 102 PSI)
• Absolute/differential pressure sensors
...
MS7907
PRESSURE SENSOR DIE (0-7 BAR)
0 to 700 kPa range (7 bar or 102 PSI)
Absolute/differential pressure sensors
High linearity, small size RoHS-compatible & Pb-free1
DESCRIPTION
The sensor element of the MS7907 consists of a silicon micro-machined membrane. Implanted resistors make use of the piezo-resistive effect to sense the membrane deflection and transform it in an electrical signal. This sensor, which has outstanding linearity and span values, is available in various configurations. The absolute pressure sensor employs a sealed vacuum reference cavity underneath the membrane. The Pyrex glass wafer used for this sealing has a thickness of 0.2 mm (MS7907-A_0.2) or 0.5 mm (MS7907-A_0.5). There are two gauge versions available: one with a drilled Pyrex glass (MS7907-D) and the other without Pyrex glass (MS7907-S).
FEATURES
Uncompensated pressure sensor die Output Span 150mV @ 5V Temperature Range -40°…+125°C
Linearity 0.05% (typical) Small Die Size 1.72 x 1.58mm (MS7907-A) Low Cost, High reliability
APPLICATION
For absolute or differential pressure sensor systems Engine controls Dive computers
ELECTRICAL CONNECTIONS
Positive output for pressure applied topside Vs+ EPI
Out+
Out-
Vs+ : Supply
voltage of Wheatstone bridge Epi : Connection of epitaxial layer (membrane) Out- : Negative output Out+ : Positive output GND1 : Ground GND2 : Ground
GND1 GND2
1 The European RoHS directive 2002/95/EC (Restriction of the use of certain Hazardous...