MS8230B

MS8230B DIGITAL MULTIMETER INSTRUCTION MANUAL DIGITAL MULTIMETER MS8230B 1000 OFF 750 V V 200 200 A 20 200µ 2 2m 200m 20m 2M 200m 200k Ω 20k 10ADC 2k 200 600V CAT III 1000V CAT II COM 10A hFE ECBE NPN PNP VΩmA MAX 10A UNFUSED FUSED MAX 200mA 1000V 750V Safety Information Warning To ensure safe operation, and in order to exploit to the full the functionality of the meter, please follow the directions in this section carefully. This multimeter has been designed according to IEC-1010 concerning electronic measuring instruments with an over voltage category CAT II 1000V, CAT III 600V and pollution 2. Follow all safety and operating instructions to ensure that the meter is used safely and is kept in good operating condition. With proper use and care, the digital meter will give you years of satisfactory service. Preliminary - When using the meter, the user must observe all normal safety rules concerning: Protection against the dangers of electrical current. Protection of the meter against misuse. - When the meter is delivered, check that it has not been damaged in transit. - When poor condition under harsh preservation or shipping conditions caused, inspect and confirm this meter without delay. - Test leads must be in good condition. Before using verify that the insulation on test leads is not damaged and/or the leads wire is not exposed. - Full compliance with safety standards can be guaranteed only if used with test leads supplied. If necessary, they must be repl...