MSP430L092 MSP430C09x
www.ti.com
MIXED SIGNAL MICROCONTROLLER
SLAS673 – SEPTEMBER 2010
FEATURES
1
• Ultra-Low Supply...
MSP430L092 MSP430C09x
www.ti.com
MIXED SIGNAL MICROCONTROLLER
SLAS673 – SEPTEMBER 2010
FEATURES
1
Ultra-Low Supply
Voltage (ULV) Range – 0.9 V to 1.5 V (1 MHz) – 1.5 V to 1.65 V (4 MHz)
Low Power Consumption – Active Mode (AM): 45 µA/MHz (1.3 V) – Standby Mode (LPM3, WDT_A Mode): 6 µA – Off Mode (LPM4): 3 µA
Wake-Up From LPMx in Less Than 5 µs 16-Bit RISC Architecture
– Extended Instructions – Up to 4-MHz System Clock Compact Clock System – 1-MHz Internal Trimmable High-Frequency
Clock – 20-kHz Internal Low-Frequency Clock
Source – External Clock Input 16-Bit Timer0_A3 With Three Capture/Compare Registers 16-Bit Timer1_A3 With Three Capture/Compare Registers ULV Analog Pool Modes – 8-Bit Analog-to-Digital Converter (ADC) – 8-Bit Digital-to-Analog Converter (DAC) – Programmable Comparator (COMP) – Supply
Voltage Monitor (SVM) – Temperature Sensor – Internal Reference
Voltage Source
ULV Port Logic – VOL Better Than 0.15 V at 2.5 mA – VOH Better Than VCC – 0.15 V at 1 mA – Timer0 PWM Signal Available on All Ports – Timer1 PWM Signal Available on All Ports
ULV Brownout Circuit (BOR) ULV RAM Retention
Voltage Below BOR Level 32-Bit Watchdog Timer (WDT-A) Bootstrap Loader in MSP430L092
Development/Prototyping Device Full Four-Wire JTAG Debug Interface Family Members Include
– MSP430C091 – 1KB ROM Memory – 128 Bytes RAM + 96 Bytes CRAM (Lockable)
– MSP430C092 – 2KB ROM Memory – 128 Bytes RAM + 96 Bytes CRAM (Lockable)
– MSP430L092 – 2KB Loader ROM ...