Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
MSP430FR2033, MSP430FR2032
SLASE4...
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
MSP430FR2033, MSP430FR2032
SLASE45D – OCTOBER 2014 – REVISED JANUARY 2019
MSP430FR203x mixed-signal microcontrollers
1 Device Overview
1.1 Features
1
Embedded microcontroller – 16-bit RISC architecture up to 16 MHz – Wide supply
voltage range from 3.6 V down to 1.8 V (minimum supply
voltage is restricted by SVS levels, see the SVS Specifications)
Optimized low-power modes (at 3 V) – Active: 126 µA/MHz – Standby – LPM3.5 with VLO: 0.4 µA – Real-time clock (RTC) counter (LPM3.5 with 32768-Hz crystal): 0.77 µA – Shutdown (LPM4.5): 15 nA
Low-power ferroelectric RAM (FRAM) – Up to 15.5KB of nonvolatile memory – Built-in error correction code (ECC) – Configurable write protection – Unified memory of program, constants, and storage – 1015 write cycle endurance – Radiation resistant and nonmagnetic
Intelligent digital peripherals – IR modulation logic – Two 16-bit timers with three capture/compare registers each (Timer_A3) – One 16-bit counter-only RTC counter – 16-bit cyclic redundancy check (CRC)
Enhanced serial communications – Enhanced USCI A (eUSCI_A) supports UART, IrDA, and SPI – Enhanced USCI B (eUSCI_B) supports SPI and I2C
High-performance analog – 10-channel 10-bit analog-to-digital converter (ADC) – Internal 1.5-V reference – Sample-and-hold 200 ksps
1.2 Applications
Smoke or fire detectors
Glass breakage detectors
Industrial sensor management
System supervisor, lo...