MVR32

www.DataSheet4U.com MVR32 Resistors Chip trimmer potentiometers MVR32 !Features 1) Superb solderability thanks to extra soldering electrode. 2) Close match between wiper and resistive element reduces wiper noise. 3) Mounting can be automated by using a carrier tape. 4) Extremely thin dimensions and light weight facilitate miniaturization of equipment. 5) Two-digit markings used to indicate resistance. 6) Special screwdriver (AD1804) available separately. 7) ROHM resistors have approved ISO-9001 certification. Design and specifications are subject to change without notice. Carefully check the specification sheet before using or ordering it. !Ratings Item Rated power Conditions Power must be derated according to the power derating curve in Figure 1 when ambient temperature exceeds 70˚C. 100 80 60 40 20 0 Specifications 0.1W (1 / 10W) / element at 70˚C POWER LOAD (%) – 55 0 70 100 125 AMBIENT TEMPERATURE ( ˚C) Fig.1 Rated voltage The voltage rating is calculated by the following equation. If the value obtained exceeds the maximum operating voltage, the voltage rating is equal to the maximum operating voltage. E : Rated voltage (V) E= P×R Nominal total resistance range Total resistance tolerance Resistance variation Effective rotation angle Operating temperature Reactive variable range P : Rated power (W) R : Nominal resistance (Ω) 100 ∼ 1MΩ ±25% B (linear) characteristics 250±20˚ −55˚C ∼ +125˚C Rotational angle, both ends within 10% (R>150Ω) within 20% (R≤150Ω) (reco...