DatasheetsPDF.com

MiCS-5525 Datasheet

Part Number MiCS-5525
Manufacturers e2v
Logo e2v
Description CO Sensor
Datasheet MiCS-5525 DatasheetMiCS-5525 Datasheet (PDF)

MiCS-5525 CO Sensor This datasheet describes the use & performance of the MiCS-5525 sensor. The package and the mode of operation illustrated in this document targets the detection of carbon monoxide (CO). FEATURES • Low heater current • Wide detection range • Wide temperature range • High sensitivity • Miniature dimensions • High resistance to shocks and vibrations • Charcoal filter to improve selectivity to CO OPERATING MODE The recommended mode of operation is constant power. The nominal pow.

  MiCS-5525   MiCS-5525






Part Number MiCS-5524
Manufacturers SGX
Logo SGX
Description MOS sensor
Datasheet MiCS-5525 DatasheetMiCS-5524 Datasheet (PDF)

MiCS-5524 Data Sheet 1084 rev 8 The MiCS-5524 is a compact MOS sensor. The MiCS-5524 is a robust MEMS sensor for indoor carbon monoxide and natural gas leakage detection; suitable also for indoor air quality monitoring; breath checker and early fire detection. Features • Smallest footprint for compact designs (5 x 7 x 1.55 mm) • Robust MEMS sensor for harsh environments • High-volume manufacturing for low-cost applications • Short lead-times Detectable gases • Carbon monoxide CO • Ethanol .

  MiCS-5525   MiCS-5525







Part Number MiCS-5521
Manufacturers e2v
Logo e2v
Description CO/VOC Sensor
Datasheet MiCS-5525 DatasheetMiCS-5521 Datasheet (PDF)

MiCS-5521 CO/VOC Sensor The MiCS-5521 is a general CO/VOC sensor. The package and the mode of operation illustrated in this document target the detection of reducing gases such as carbon monoxide (CO), hydrocarbons (HC), and volatile organic compounds (VOC). FEATURES • Low heater current • Wide detection range • High sensitivity • Short pre-heating time • Miniature dimensions • High resistance to shocks and vibrations IMPORTANT PRECAUTIONS Read the following instructions carefully before using .

  MiCS-5525   MiCS-5525







CO Sensor

MiCS-5525 CO Sensor This datasheet describes the use & performance of the MiCS-5525 sensor. The package and the mode of operation illustrated in this document targets the detection of carbon monoxide (CO). FEATURES • Low heater current • Wide detection range • Wide temperature range • High sensitivity • Miniature dimensions • High resistance to shocks and vibrations • Charcoal filter to improve selectivity to CO OPERATING MODE The recommended mode of operation is constant power. The nominal power is PH = 76 mW. The resulting temperature of the sensing layer is ~340 °C, in air at an ambient temperature of ~ 20 °C. Detection of the pollution gases is achieved by measuring the sensing resistance of the sensor. The resistance decreases in the presence of CO. SENSOR CONFIGURATION The silicon gas sensor structure consists of an accurately micro machined diaphragm with an embedded heating resistor and the sensing layer on top. The internal connections are shown below: 32 RH R.


2019-04-19 : AH3363Q    A432    A7442    HEF4538B    74HC4075-Q100    74HCT4075-Q100    74HC2G04    74HCT2G04    74AHC2G00    74AHCT2G00   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)