NCP1402

NCP1402 200 mA, PFM Step-Up Micropower Switching Regulator The NCP1402 series are monolithic micropower step−up DC to DC converter that are specially designed for powering portable equipment from one or two cell battery packs.These devices are designed to startup with a cell voltage of 0.8 V and operate down to less than 0.3 V. With only three external components, this series allow a simple means to implement highly efficient converters that are capable of up to 200 mA of output current at Vin = 2.0 V, VOUT = 3.0 V. Each device consists of an on−chip PFM (Pulse Frequency Modulation) oscillator, PFM controller, PFM comparator, soft−start, voltage reference, feedback resistors, driver, and power MOSFET switch with current limit protection. Additionally, a chip enable feature is provided to power down the converter for extended battery life. The NCP1402 device series are available in the Thin SOT−23−5 package with five standard regulated output voltages. Additional voltages that range from 1.8 V to 5.0 V in 100 mV steps can be manufactured. Features Extremely Low Startup Voltage of 0.8 V Operation Down to Less than 0.3 V High Efficiency 85% (Vin = 2.0 V, VOUT = 3.0 V, 70 mA) Low Operating Current of 30 mA (VOUT = 1.9 V) Output Voltage Accuracy ±2.5% Low Converter Ripple with Typical 30 mV Only Three External Components Are Required Chip Enable Power Down Capability for Extended Battery Life Micro Miniature Thin SOT−23−5 Packages These Devices are Pb−Free and...