NCP391
Positive Overvoltage Protection Controller with Internal Low RON NMOS FET
The NCP391 is able to disconnect the s...
NCP391
Positive Over
voltage Protection Controller with Internal Low RON NMOS FET
The NCP391 is able to disconnect the systems from its output pin when wrong input operating conditions are detected. The system is positive over
voltage protected up to +28 V.
This device uses an internal NMOS and therefore, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP391 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS, if the input
voltage exceeds the over
voltage threshold (OVLO) or falls below the under
voltage threshold (UVLO).
At powerup (EN pin = low level), the Vout turns on ton time after the Vin exceeds the under
voltage threshold.
The NCP391 provides a negative going flag (FLAG) output, which alerts the system that a fault has occurred.
In addition, the device has ESD−protected input (15 kV Air) when bypassed with a 1.0 mF or larger capacitor.
Features
Over
voltage Protection up to 28 V On−Chip Low RDS(on) NMOS Transistor Internal Charge Pump Over
voltage Lockout (OVLO) Under
voltage Lockout (UVLO) Soft−Start Alert FLAG Output Shutdown EN Input Compliance to IEC61000−4−2 (Level 4)
8.0 kV (Contact) 15 kV (Air)
ESD Ratings: Machine Model = B
Human Body Model = 2
WLCSP6 1.31x1.04 mm Package This is a Pb−Free Device
Applications
Cell Phones Camera Phones Digital Still Cameras Personal Digital Applications MP3 Players
http://onsemi.com
WLCSP6 FCA...