Synchronous Buck Converter - Step Down
3.0 A
NCP6343
The NCP6343 is a synchronous buck converter optimized to supply t...
Synchronous Buck Converter - Step Down
3.0 A
NCP6343
The NCP6343 is a synchronous buck converter optimized to supply the different sub systems of portable applications powered by one cell Li−Ion or three cell Alkaline/NiCd/NiMH batteries. The device is able to deliver up to 3.0 A, with programmable output
voltage from 0.6 V to 1.4 V. It can share the same output rail with another DCDC and works as a transient load helper. Operation at a 3 MHz switching frequency allows the use of small components. Synchronous rectification and automatic PWM/PFM transitions improve overall solution efficiency. The NCP6343 is in a space saving, low profile 1.99 x 1.34 mm CSP−15 package.
Features
Input
Voltage Range from 2.3 V to 5.5 V: Battery and 5 V Rail
Powered Applications
Programmable Output
Voltage: 0.6 V to 1.4 V in 6.25 mV Steps Modular Output Stage Drive Strength for Increased Efficiency
Depending on the Output Current
3 MHz Switching Frequency with On Chip Oscillator Uses 470 nH Inductor and 22 mF
Capacitors for Optimized Footprint
and Solution Thickness
PFM/PWM Operation for Optimum Increased Efficiency Ultra Low 0.8 mA Off Mode Current Low 35 mA Quiescent Current I2C Control Interface with Interrupt and Dynamic
Voltage Scaling
Support
Thermal Protections and Temperature Management Transient Load Helper: Share the Same Rail with Another DCDC Small 1.99 x 1.34 mm / 0.4 mm Pitch CSP Package These are Pb−Free Devices
www.onsemi.com
MARKING DIAGRAM
WLCSP15 ...