www.murata-ps.com
NPH15S Series
Isolated 15W Single Output DC/DC Converters
FEATURES RoHS compliant High efficiency...
www.murata-ps.com
NPH15S Series
Isolated 15W Single Output DC/DC Converters
FEATURES RoHS compliant High efficiency to 89% Power density up to 2.4W/cm3 UL 94V-0 package material Industry standard pinout UL 1950 recognized Non latching current limit Constant 350kHz frequency 1.5kV input to output isolation Versatile control options Continuous rating to 30W at 40ºC without
heatsink Operation to zero load Protected against load faults Internal over temperature protection Uses no electrolytic
capacitors
DESCRIPTION
The NPH15S series of DC/DC converters combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved in a small package without heatsinking, and a high surge capability will provide for start-up and transient loads, whilst being thermally protected against sustained overload. Overload protection of the “constant current” type ensures start-up into complex load conditions. The copper case achieves efficient heat transfer and screening. The product range has been recognised by Underwriters Laboratory (UL) to UL 1950 for operational insulation, file number E151252 applies.
For full details go to www.murata-ps.com/rohs
www.murata-ps.com/support
SELECTION GUIDE
Order Code1
Nominal Input
Voltage
V
NPH15S2403EiC
24
NPH15S2403iC
...