NXS0104
Dual supply translating transceiver; open drain;
auto direction sensing
Rev. 4 — 30 June 2021
Product data s...
NXS0104
Dual supply translating transceiver; open drain;
auto direction sensing
Rev. 4 — 30 June 2021
Product data sheet
1. General description
The NXS0104 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional
voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any
voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any
voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the
voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.
2. Features and benefits
Wide supply
voltage range: VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V
Maximum data rates: Push-pull: 24 Mbps
IOFF circuitry provides partial Power-down mode operation Inputs accept
voltages up to 5.5 V ESD protection:
HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 kV IEC61000-4-2 contact discharge exce...