www.murata-ps.com
OKR-T/10-W12 Series
Adjustable Output 10-Amp SIP-mount DC/DC Converters
Typical unit
FEATURES
600...
www.murata-ps.com
OKR-T/10-W12 Series
Adjustable Output 10-Amp SIP-mount DC/DC Converters
Typical unit
FEATURES
600 KHz operation 4.5-14 Vdc input
voltage range Programmable output
voltage from 0.591-6.0 VDC Drives up to 200 μF ceramic capacitive loads High power conversion efficiency at 92% Outstanding thermal derating performance Over temperature and over current protection On/Off control SIP, 0.41 x 0.65 x 0.3 inches (10.4 x 16.5 x 7.62 mm). Meets UL/EN/IEC 60950-1 safety certification RoHS-6 hazardous substance compliance
PRODUCT OVERVIEW
The OKR-T/10 series are SIP non-isolated Point-of-Load (PoL) DC/DC power converters measuring only 0.41 x 0.65 x 0.3 inches (10.4 x 16.5 x 7.62 mm). The wide input range is 4.5 to 14 Volts DC. Based on 600 KHz synchronous buck topology, the high power conversion efficient Point of Load (PoL) module features programmable output
voltage and On/Off control, under
voltage lock out (UVLO), overcurrent and over temperature protections. These units meet all standard UL/EN/ IEC 60950-1 safety certifications and RoHS-6 hazardous substance compliance.
+Vin
F1 On/Off Control
External DC Power Source
Open = On Closed = Off
(Positive On/Off)
Common
Controller
t4XJUDIJOH t'JMUFST t$VSSFOU4FOTF
Reference and Error Amplifier
Figure 1. Simplified Block Diagram
+Vout Trim Common
For full details go to www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_OKR-T/10-W12 Series.A07 Page 1 of 10
OKR-T/10-W12 Series
Adjustable O...