OKR-T-3-W12-C

www.murata-ps.com OKR-T/3 Series Adjustable Output 3-Amp SIP-mount DC/DC Converters Typical unit FEATURES 600 KHz operation 4.5-14 Vdc input voltage range Programmable output voltage from 0.591-6.0 VDC Drives up to 200 μF ceramic capacitive loads High power conversion efficiency at 93% Outstanding thermal derating performance Over temperature and over current protection On/Off control SIP, 0.41 x 0.65 x 0.4 inches (10.4 x 16.5 x 10.2 mm). Certified to UL/EN/IEC 60950-1 safety standards, 2nd edition RoHS-6 hazardous substance compliance PRODUCT OVERVIEW The OKR-T/3 series are miniature SIP non-isolated Point-of-Load (PoL) DC/DC power converters measuring only 0.41 x 0.65 x 0.22 inches (10.4 x 16.5 x 5.6 mm). The wide input range is 4.5 to 14 Volts DC. Based on 600 KHz synchronous buck topology, the high power conversion efficient Point of Load (PoL) module features programmable output voltage and On/Off control, under voltage lock out (UVLO), overcurrent and over temperature protections. These units are certified to UL/EN/ IEC 60950-1 safety standards (2nd edition) and RoHS-6 hazardous substance compliance. +Vin F1 On/Off Control External DC Power Source Open = On Closed = Off (Positive On/Off) Common Figure 1. Connection Diagram Controller t
4XJUDIJOH t
'JMUFST t
$VSSFOU
4FOTF Reference and Error Amplifier For full details go to www.murata-ps.com/rohs www.murata-ps.com/support +Vout Trim Common MDC_OKR-T/3-W12.B03 Page 1 of 18 OKR-T/3 Series Adju...