OPA170-EP
www.ti.com
SBOS598A – DECEMBER 2012 – REVISED DECEMBER 2012
36-V, SINGLE-SUPPLY, LOW-POWER OPERATIONAL AMPL...
OPA170-EP
www.ti.com
SBOS598A – DECEMBER 2012 – REVISED DECEMBER 2012
36-V, SINGLE-SUPPLY, LOW-POWER OPERATIONAL AMPLIFIER
Check for Samples: OPA170-EP
FEATURES
1
2 Supply Range: +2.7V to +36V, ±1.35V to ±18V Low Noise: 19nV/√Hz RFI Filtered Inputs Input Range Includes the Negative Supply Input Range Operates to Positive Supply Rail-to-Rail Output Gain Bandwidth: 1.2MHz Low Quiescent Current: 110µA per Amplifier High Common-Mode Rejection: 120dB Low Bias Current: 15pA (max) microPackage:
– Single in 5-Pin SOT553
APPLICATIONS
Tracking Amplifier in Power Modules Merchant Power Supplies Transducer
Amplifiers Bridge
Amplifiers Temperature Measurements Strain Gauge
Amplifiers Precision Integrators Battery-Powered Instruments Test Equipment
DESCRIPTION
The OPA170 is a 36-V, single-supply, low-noise operational amplifier that features a micro package with the ability to operate on supplies ranging from +2.7V (±1.35V) to +36V (±18V). It offers good offset, drift, and bandwidth with low quiescent current. Unlike most op amps, which are specified at only one supply
voltage, the OPA170 is specified from +2.7V to +36V. Input signals beyond the supply rails do not cause phase reversal. The OPA170 is stable with capacitive loads up to 300pF. The input can operate 100mV below the negative rail and within 2V of the positive rail for normal operation. Note that these devices can operate with full rail-to-rail input 100mV beyond the positive rail, bu...