DatasheetsPDF.com

P4KE91A Datasheet

Part Number P4KE91A
Manufacturers LRC
Logo LRC
Description GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
Datasheet P4KE91A DatasheetP4KE91A Datasheet (PDF)

P4KE**** Series GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 TO 550 Volts 400Watt Peak Power 1.0 Watt Steady State Feature * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-41 package * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: typically less than 1.0 ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperat.

  P4KE91A   P4KE91A






Part Number P4KE91A
Manufacturers EIC
Logo EIC
Description TRANSIENT VOLTAGE SUPPRESSOR
Datasheet P4KE91A DatasheetP4KE91A Datasheet (PDF)

P4KE SERIES VBR : 6.8 - 550 Volts PPK : 400 Watts TRANSIENT VOLTAGE SUPPRESSOR DO - 41 FEATURES : * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1µA above 10V * Pb / RoHS Free MECHANICAL DATA * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, method 208 guaranteed * Polarity : Color band denotes.

  P4KE91A   P4KE91A







Part Number P4KE91A
Manufacturers MCC
Logo MCC
Description TVS
Datasheet P4KE91A DatasheetP4KE91A Datasheet (PDF)

P4KE6.8(C)A THRU P4KE550(C)A E480232 Features • Low Zener Imdepance • High Temp Soldering: 260°C for 10 Seconds At Terminals • Unidirectional And Bidirectional • For Bidirectional Devices Add “C” To The Suffix Of The Part Number: i.e. P4KE6.8CA for 5% Tolerance Devices • Halogen Free Available Upon Request By Adding Suffix "-HF" • Moisture Sensitivity Level 1 • Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant (Note1) ("P" Suffix Designates RoHS Compliant. See Ordering.

  P4KE91A   P4KE91A







Part Number P4KE91A
Manufacturers Microsemi
Logo Microsemi
Description 400 Watt Transient Voltage Suppressor
Datasheet P4KE91A DatasheetP4KE91A Datasheet (PDF)

SCOTTSDALE DIVISION P4KE6.8 thru P4KE400CA, e3 400 Watt Transient Voltage Suppressor WWW.Microsemi .COM DESCRIPTION APPEARANCE This 400 W Transient Voltage Suppressor (TVS) series is an economical molded axial-leaded package to protect voltage-sensitive components from destructive or partial degradation. They are available in both unidirectional or bi-directional configurations as well as RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part number. They have a peak.

  P4KE91A   P4KE91A







Part Number P4KE91A
Manufacturers HITANO
Logo HITANO
Description Transient Voltage Suppressors
Datasheet P4KE91A DatasheetP4KE91A Datasheet (PDF)

Data Sheet Customer: Product: Transient Voltage Suppressors 400W – P4KE Series Package : DO-41 Issued Date: 10-Feb.-2015 Edition: Ver. 1 Record of change Date Ver. 10-Feb.-2015 1 Description Page HITANO ENTERPRISE CORP. 7F-7, No. 3, Wu Chuan 1st Road, New Taipei Industrial Park, New Taipei City, TAIWAN, R.O.C. Tel: +886 2 2299 1331 (Rep.) Fax: +886 2 2298 2466, 2298 2969 Prepared by 10-Feb.-2015 Andy Hsu Checked by 10-Feb.-2015 Hwa Wu Approved by 10-Feb.-2015 Hwa Wu Accepted by (custome.

  P4KE91A   P4KE91A







Part Number P4KE91A
Manufacturers SOCAY
Logo SOCAY
Description Axial Lead Transient Voltage Suppressors
Datasheet P4KE91A DatasheetP4KE91A Datasheet (PDF)

Axial Lead Transient Voltage Suppressors (TVS) P4KE Series 6.8 To 600 V 400W Description The P4KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in DO-41 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 400W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: ty.

  P4KE91A   P4KE91A







GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

P4KE**** Series GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 TO 550 Volts 400Watt Peak Power 1.0 Watt Steady State Feature * Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-41 package * 400W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: typically less than 1.0 ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering guaranteed: 260 /10 seconds/.375”,(9.5mm) lead length/5lbs., (2.3kg) tension Mechanical Data Case: JEDEC DO-41 molded plastic Terminals: Axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denoted cathode except Bipolar we declare that the material of product is halogen free (green epoxy compound). Mounting Position: Any Weight: 0.011 oz., 0.284 g DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types P4KE6.8 thru types P4KE.


2017-10-16 : P4KE400    P4KE400A    P4KE440    P4KE440A    P4KE550    P4KE550A    P4KE250    P4KE250A    P4KE300    P4KE300A   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)