UNISONIC TECHNOLOGIES CO., LTD
PA7468
Preliminary
STEREO 2.6W AUDIO POWER AMPLIFIER WITH DC VOLUME CONTROL
DESCRIP...
UNISONIC TECHNOLOGIES CO., LTD
PA7468
Preliminary
STEREO 2.6W AUDIO POWER AMPLIFIER WITH DC VOLUME CONTROL
DESCRIPTION
As an audio power amplifier with DC volume control, UTC PA7468 is a stereo bridged audio power amplifier. In normal operation it can produce 2.6Ω (1.8W) into 4W with less than 10% (1.0%) THD+N.
In UTC PA7468, the attenuator range of the volume control is from 20dB (@DC_VOL=0V) to -80dB (@DC_VOL=3.54V) with 32 steps. Besides, the UTC PA7468 includes the depop circuitry and the thermal shutdown protection circuitry (to reduce pops and clicks noise during power up or shutdown mode operation).
The UTC PA7468 has a BTL mode for speaker drive and a SE mode for headphone drive. These tow modes can be quickly chosen
by the SE/ BTL input control pin signal.
FEATURES
* Low Operating Current: 9mA *Two Output Modes Allowable with BTL and SE Modes(chosen by
SE/ BTL pin) *Low Current Consumption :1mA(in Shutdown Mode) *With Short Circuit Protection *With Thermal Shutdown Protection *With Over Current Protection Circuitry *Eliminating Turn-on and Turn-off Transients in Outputs by Improved Depop Circuitry to. *Very High PSRR *32 Steps Volume Adjustable *BTL Mode :2.6W per Channel Output Power into 4Ω Load at 5V
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
PA7468L-S16-R
PA7468G-S16-R
PA7468L-S16-T
PA7468G-S16-T
Package
SOP-16 SOP-16
CMOS IC
Packing Tape Reel
Tube
www.unisonic.com.tw Copyright © 2011 Unisonic Technologies Co., Ltd
1 of 6
QW...