DatasheetsPDF.com

PCA9546A Datasheet

Part Number PCA9546A
Manufacturers NXP
Logo NXP
Description 4-channel I2C switch
Datasheet PCA9546A DatasheetPCA9546A Datasheet (PDF)

www.DataSheet4U.com PCA9546A 4-channel I2C switch with reset Rev. 03 — 6 April 2005 Product data sheet 1. General description The PCA9546A is a quad bi-directional translating switch controlled via the I2C-bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individual SCx/SDx channel or combination of channels can be selected, determined by the contents of the programmable control register. An active LOW reset input allows the PCA9546A to recover from a situation.

  PCA9546A   PCA9546A






Part Number PCA9546A
Manufacturers Texas Instruments
Logo Texas Instruments
Description Low Voltage 4-Channel I2C and SMBus Switch
Datasheet PCA9546A DatasheetPCA9546A Datasheet (PDF)

Product Folder Sample & Buy Technical Documents Tools & Software Support & Community PCA9546A SCPS148G – OCTOBER 2005 – REVISED MAY 2016 PCA9546A Low Voltage 4-Channel I2C and SMBus Switch with Reset Function 1 Features •1 1-of-4 Bidirectional Translating Switches • I2C Bus and SMBus Compatible • Active-Low Reset Input • Three Address Pins, Allowing up to Eight PCA9546A Devices on the I2C Bus • Channel Selection Via I2C Bus, in Any Combination • Power-up With All Switch Channels Deselected.

  PCA9546A   PCA9546A







4-channel I2C switch

www.DataSheet4U.com PCA9546A 4-channel I2C switch with reset Rev. 03 — 6 April 2005 Product data sheet 1. General description The PCA9546A is a quad bi-directional translating switch controlled via the I2C-bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individual SCx/SDx channel or combination of channels can be selected, determined by the contents of the programmable control register. An active LOW reset input allows the PCA9546A to recover from a situation where one of the downstream I2C-buses is stuck in a LOW state. Pulling the RESET pin LOW resets the I2C-bus state machine and causes all the channels to be deselected as does the internal Power-On Reset (POR) function. The pass gates of the switches are constructed such that the VDD pin can be used to limit the maximum high voltage which will be passed by the PCA9546A. This allows the use of different bus voltages on each pair, so that 1.8 V or 2.5 V or 3.3 V parts can communicate with 5 V parts without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O pins are 5 V tolerant. 2. Features s s s s s s s s s s s s s s s 1-of-4 bi-directional translating switches I2C-bus interface logic; compatible with SMBus standards Active LOW reset input 3 address pins allowing up to 8 devices on the I2C-bus Channel selection via I2C-bus, in any combination Power-up with all switch channels deselected Low Ron switches Allows vo.


2006-11-20 : BAS16LP    1N4448HLP    BC847BLP    BC857BLP    PMP4501G    PMP4501Y    PMP5201G    PMP5201Y    PMP4201G    PMP4201Y   


@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)