PCM1808-Q1
www.ti.com
SLES265A – MARCH 2011 – REVISED AUGUST 2012
SINGLE-ENDED, ANALOG-INPUT 24-BIT, 96-kHz STEREO A/...
PCM1808-Q1
www.ti.com
SLES265A – MARCH 2011 – REVISED AUGUST 2012
SINGLE-ENDED, ANALOG-INPUT 24-BIT, 96-kHz STEREO A/D CONVERTER
Check for Samples: PCM1808-Q1
FEATURES
1
23 Qualified for Automotive Applications 24-Bit Delta-Sigma Stereo A/D Converter Single-Ended
Voltage Input: 3 Vp-p High Performance:
– THD + N: –93 dB (Typical) – SNR: 99 dB (Typical) – Dynamic Range: 99 dB (Typical) Oversampling Decimation Filter: – Oversampling Frequency: ×64 – Pass-Band Ripple: ±0.05 dB – Stop-Band Attenuation: –65 dB – On-Chip High-Pass Filter: 0.91 Hz (48 kHz) Flexible PCM Audio Interface – Master/Slave Mode Selectable – Data Formats: 24-Bit I2S, 24-Bit Left-
Justified Power Down and Reset by Halting System
Clock Analog Antialias LPF Included Sampling Rate: 8 kHz–96 kHz System Clock: 256 fS, 384 fS, 512 fS Dual Power Supplies:
– 5-V for Analog – 3.3-V for Digital
Package: 14-Pin TSSOP
DESCRIPTION
The PCM1808-Q1 is high-performance, low-cost, single-chip, stereo analog-to-digital converter with single-ended analog
voltage input. The PCM1808-Q1 uses a delta-sigma modulator with 64-times oversampling and includes a digital decimation filter and high-pass filter that removes the dc component of the input signal. For various applications, the PCM1808-Q1 supports master and slave mode and two data formats in serial audio interface.
The PCM1808-Q1 supports the power-down and reset function by means of halting the system clock.
The PCM1808-Q1 is suitable for wide var...