Product Description
The PE4249 is a high-isolation MOSFET Switch designed for CATV applications, covering a broad freque...
Product Description
The PE4249 is a high-isolation
MOSFET Switch designed for CATV applications, covering a broad frequency range from DC up to 1.3 GHz. This singlesupply SPST switch integrates a single-pin
CMOS control interface, and is non-reflective at port RF1 and open reflective at port RF2 when commanded OFF. It also provides low insertion loss with extremely low bias requirements while operating on a single 3-volt supply. In a typical CATV application, the high isolation PE4249 can replace bulky and expensive mechanical switches.
The PE4249 is manufactured in Peregrine’s patented Ultra Thin Silicon (UTSi)
CMOS process, offering the performance of GaAs with the economy and integration of conventional
CMOS.
Figure 1. Functional Schematic Diagram
RF1 CTRL
75 Ω
RF2
PRODUCT SPECIFICATION
PE4249
SPST CATV
MOSFET Switch
Features 75-ohm impedance switch Non-reflective at RF1, open reflective at RF2 when OFF 75-ohm (0.25 watt) termination High isolation: 85 dB at 5 MHz, 60 dB at 1 GHz Low insertion loss: 0.5 dB at 5 MHz, 0.8 dB at 1 GHz High input IP2: >80 dBm
CMOS/TTL single-pin control Single +3 volt supply operation Extremely low bias: 33 µA @ 3V
Figure 2. Pin Configuration
VDD 1 GND 2 RF1 3
Exposed Solder Pad
(bottom side)
6 RF2 5 GND 4 CTRL
Table 1. Electrical Specifications @ +25 °C (ZS = ZL = 75 Ω)
Parameter
Condition
Minimum
Operating Frequency1
DC
Insertion Loss
DC – 50 MHz 1000 MHz
Isolation
DC – 50 MHz 1000 MHz
80 58
Return Loss...