PE43508
Document Category: Product Specification
UltraCMOS® RF Digital Step Attenuator, 9 kHz–55 GHz
Features
• Wideban...
PE43508
Document Category: Product Specification
Ultra
CMOS® RF Digital Step Attenuator, 9 kHz–55 GHz
Features
Wideband support up to 55 GHz Glitch-safe attenuation state transitions Flexible attenuation steps of 0.5 dB and 1 dB up to
31.5 dB Extended +105 °C operating temperature Parallel and serial programming interfaces with
serial addressability Flip-chip die
Figure 1 PE43508 Functional Diagram
Switched Attenuator Array
RF Input
RF Output
Applications
Test and measurement (T&M) Point-to-point communication systems Very small aperture terminals (VSAT)
Parallel Control
6-bit
Serial In
CLK
Control Logic Interface
Serial Out
LE
A0 A1 A2
(optional) P/S VDD VSS_EXT
Product Description
The PE43508 is a 50Ω, HaRP™ technology-enhanced, 6-bit RF digital step attenuator (DSA) that supports a wide frequency range from 9k to 55 GHz. The PE43508 features glitch-safe attenuation state transitions, supports 1.8V control
voltage and optional VSS_EXT bypass mode to improve spurious performance, making this device ideal for test and measurement, point-to-point communication systems, and very small aperture terminals (VSAT).
The PE43508 provides an integrated digital control interface that supports both serial addressable and parallel programming of the attenuation. The PE43508 covers a 31.5 dB attenuation range in 0.5 dB and 1 dB steps. It is capable of maintaining 0.5 dB and 1 dB monotonicity through 55 GHz. In addition, no external blocking
capacitors are req...