HDMI Switch
PI3HDMI1310-A
HDMI™ Switch with non-blocking EQ Circuitry
Features
• Differential channel 3:1 Mux/DeMux for TDMS signa...
Description
PI3HDMI1310-A
HDMI™ Switch with non-blocking EQ Circuitry
Features
Differential channel 3:1 Mux/DeMux for TDMS signals 3:1 Mux/DeMux for DDC signals non-EQ blocking circuitry to utilize ideal EQ found in
main receiver chipset Low power consumption to support Energy Star
Compliance Data rate support up to 3.4Gbps (16bit color depth per
channel) 2 pin control for port selection 3.3V power and 5V standby power ESD protection on all I/O pins → ±8kV contact per IEC61000-4-2 → 7kV HBM per JESD22 Packaging (Pb-free & Green): 72 - Contact TQFN
Description
Pericom Semiconductor’s PI3HDMI™ series of switch circuits are targeted for high-resolution video networks that are based on DVI/HDMI standards. The PI3HDMI1310-A is a 3-to-1 HDMI Mux/DeMux Switch. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation. The maximum DVI/ HDMI data rate of 3.4Gbps provides the resolution required by next generation HDTV and PC graphics. Three differential channels are used for data (video signals for DVI or audio/video signals for HDMI), and one differential channel is used for Clock for decoding the TMDS signals at the outputs.
PI3HDMI1310-A was designed specifically to meet ATC-Sink requirement for the HPD ports. The high speed video ports and DDC ports can be either source or sink.
All TMDS I/O pins are protected with Pericom's ESD protection circuits, supporting protection against ESD damage as high as ±8kV contact per IEC6000-4-2 spec.
...
Similar Datasheet