PM8805
IEEE 802.3bt PoE-PD interface with embedded dual active bridge
VFQFPN43 8x8mm exposed pad
Features
Dual activ...
PM8805
IEEE 802.3bt PoE-PD interface with embedded dual active bridge
VFQFPN43 8x8mm exposed pad
Features
Dual active bridge, hot swap
MOSFETand PoE-PD interface in a system-in-package
100 V N-ch
MOSFETs with 0.2 Ω total path resistance for each active bridge.
100 V, 0.1 Ω high-side N-ch hot swap
MOSFET PoE-PD single-signature interface compliant
with IEEE 802.3bt / at / af Supports 4-pair PoE applications Supports 12 V auxiliary sources Identifies which kind of PSE (standard or
legacy) is connected with and provides successful IEEE802.3bt / at / af classification indication as a combination of the T0, T1 and T2 signals (open drain) Smart operational modes Programmable classification current with 3.3 ms delay. Optional Autoclass feature Advanced energy-saving MPS timings Two-step hot swap current protection: DC with 1 ms delay and short-circuit with 10 us delay. Controlled pre-charge of the output capacitor PGD signal (open drain) to enable an external PWM controller. Thermal shutdown protection
Datasheet - Production data
Applications
High power wireless data systems
Security cameras
Access points
Public information displays
PoE lighting systems
Description
The PM8805 is a system-in-package for smart power supply of Power over Ethernet (PoE) Powered Devices (PD) and it is applicable for power level up to 99.9 W.
It embeds: two active bridges and their driving circuitry, a charge pump to drive the high-side
MOSFETs, the hot swap MOSF...