MICROWAVE NOISE TUBES & NOISE SOURCES
TD/TN Series
DESCRIPTION
CP Clare’s TD Series of gas discharge microwave noise tu...
MICROWAVE NOISE TUBES & NOISE SOURCES
TD/TN Series
DESCRIPTION
CP Clare’s TD Series of gas discharge microwave noise tubes and TN Series of gas discharge microwave noise sources are the element in a microwave RF system that allows accurate measurements of the noise figure of the receiver or its components. The requirements of a device used for making such noise figure measurements include broad bandwidth inherent in the active element, stability, ease of operation, and long life. In general, the range of usefulness of these noise sources permits measurements of noise figures from about 2 to 30dB. The PS-237 through PS-240 current-regulated power supplies can be used to operate many of the noise sources described herein.
FEATURES
s s s s s
APPLICATIONS
s Noise figure measurement
Excess noise ratios (ENR): up to 20dB Broad bandwidth Excellent long term stability Life up to 20,000 hours AC, DC, or pulsed operation
SPECIFICATION RANGES
Parameter Frequency ENR Operating Current Starting
Voltage Range 0.2 - 220.0 8.8 - 20.1 30 - 250 0.9 - 7.0 Units GHz dB mA kV
(See detailed specifications for more data. Contact CP Clare for TD and TN part numbers or for other requirements not listed.)
www.cpclare.com
571
MICROWAVE NOISE TUBES & NOISE SOURCES
TD/TN Series
TD SERIES GAS DISCHARGE NOISE SOURCE TUBES with Filamentary or Hollow Cathodes
All characteristics at 25˚C. FREQUENCY BAND WAVERANGE GUIDE (GHz) 1.12-1.70 (1.20-1.40 only) L WR-650 PART # / EIA TYPE NUMBER TD-21/6881 TD-2...