||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||...
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Features
Operating
voltage: 5V (Typ.) Average supply current: 120µA (Typ.) 2 stage op-amp for filter. Build-in noise rejection circuit. On-chip regulator. Adjustable output duration Override function. ON/AUTO/OFF selectable by MODE pin Apply to AC 220V/50Hz and 110V/60Hz. Auto-reset if the ZC signal disappears over 3
seconds Output pulse (PT8A2641/5/7) to drive triac or
output level (PT8A2642/6/8) to drive relay. CDS to enable/disable output. 40 second warm-up. Quick check mode for installation.
PT8A2641-2642/2645-2648
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PIR Sensor Light Switch
Product Description
The PT8A264X is a
CMOS LSI chip designed for use in automatic PIR lamp control. It can operate with a 2-wire configuration for triac applications or with a 3-wire configuration for relay applications. The chip is equipped with operational
amplifiers, a comparator, timer, a zero crossing detector, control circuit, a
voltage regulator, a system oscillator, and an output timing oscillator.
Its PIR sensor detects infrared power variations induced by the motion of a human body and transforms it to a
voltage variation. If the PIR output
voltage variation conforms t...