www.DataSheet4U.com
PTN3342
High speed differential line receiver
Rev. 01 — 05 January 2004 Product data
1. Descriptio...
www.DataSheet4U.com
PTN3342
High speed differential line receiver
Rev. 01 — 05 January 2004 Product data
1. Description
The PTN3342 is a differential line receiver that implements the electrical characteristics of Low-
Voltage Differential Signaling (LVDS). This device meets or exceeds the requirements of the ANSI TIA/EIA-644 Standard. LVDS is used to achieve higher data rates on commonly used media. LVDS overcomes the limitations of achievable slew rates and EMI restrictions of previous differential signaling techniques. The PTN3342 operates at a 3.3 volt supply level. Any of the four differential receivers provides a valid logical output state with a ±100 mV differential input
voltage within the input common-mode
voltage range. The input common-mode
voltage range allows 1 volt of ground potential difference between two LVDS nodes. The PTN3342 is identical to the PTN3332 but with the termination resistor integrated with the receiver. The intended application of this device is for point-to-point baseband transmission rates over a controlled impedance media of approximately 100 Ω. The maximum rates and distance of data transfer are dependent upon the attenuation characteristics of the media selected and the noise coupling to the environment. The PTN3342 is designed to function over the full industrial temperature range of −40 °C to +85 °C.
2. Features
s s s s s s s s s Meets or exceeds the requirements of ANSI TIA/EIA-644 Standard Designed for signaling rates of up to 400 Mb...