HIGH BANDWIDTH BUS SWITCH
IDTQS3VH16861 2.5V / 3.3V 20-BIT FLOW-THROUGH PIN OUT, HIGH BANDWIDTH BUS SWITCH
INDUSTRIAL TEMPERATURE RANGE
QUICKSWI...
Description
IDTQS3VH16861 2.5V / 3.3V 20-BIT FLOW-THROUGH PIN OUT, HIGH BANDWIDTH BUS SWITCH
INDUSTRIAL TEMPERATURE RANGE
QUICKSWITCH® PRODUCTS 2.5V/
IDTQS3VH16861
3.3V 20-BIT FLOW-THROUGH PIN OUT,
HIGH BANDWIDTH BUS SWITCH
FEATURES:
N channel FET switches with no parasitic diode to Vcc − Isolation under power-off conditions − No DC path to Vcc or GND − 5V tolerant in OFF and ON state
5V tolerant I/Os Low RON - 4Ω typical Flat RON characteristics over operating range Rail-to-rail switching 0 - 5V Bidirectional dataflow with near-zero delay: no added ground
bounce Excellent RON matching between channels Vcc operation: 2.3V to 3.6V High bandwidth - up to 500 MHz LVTTL-compatible control Inputs Undershoot Clamp Diodes on all switch and control Inputs Low I/O capacitance, 4pF typical Available in TSSOP package
APPLICATIONS:
Hot-swapping 10/100 Base-T, Ethernet LAN switch Low distortion analog switch Replaces mechanical relay ATM 25/155 switching
FUNCTIONAL BLOCK DIAGRAM
DESCRIPTION:
The QS3VH16861 HotSwitch with 20-bit flow-though pin out is a high bandwidth bus switch. The QS3VH16861 has very low ON resistance, resulting in under 250ps propagation delay through the switch. The switches are controlled by active low enable (BEx) controls. In the ON state, the switches can pass signals up to 5V. In the OFF state, the switches offer very high impedence at the terminals.
The combination of near-zero propagation delay, high OFF impedance, and over-voltag...
Similar Datasheet