RHF330A

RHF330A Datasheet Rad-hard 1 GHz low noise operational amplifier Product status link RHF330A Features Bandwidth: 1 GHz (gain = 2) Slew rate: 1800 V/μs Input noise: 1.3 nV/√ Hz Distortion: SFDR = -78 dBc (10 MHz, 2 Vpp) 100 Ω load optimized output stage 5 V power supply ELDRS free up to 300 krad SEL immune at 110 MeV.cm2/mg SET characterized SMD pin: 5962F07231 Mass: 0.45 g Applications Space data acquisition systems Aerospace instrumentation Nuclear and high energy physics Harsh environments ADC drivers Description The RHF330A device is a current feedback, single operational amplifier that uses very high-speed complementary technology to provide a large bandwidth of 1 GHz in gains of 2 while drawing only 16.6 mA of quiescent current. The RHF330A, also offers 0.1 dB gain flatness up to 160 MHz with a gain of 2. With a slew rate of 1800 V/µs and an output stage optimized for standard 100 Ω loads, this device is highly suitable for applications where speed and low distortion are the main requirements. The RHF330A is mounted in a Flat-8 hermetic package. DS6200 - Rev 8 - February 2020 For further information contact your local STMicroelectronics sales office. www.st.com RHF330A Pin description 1 Pin description Figure 1. Pin connections of ceramic Flat-8 (top view) 18 NC IN- _ NC +VCC IN+ VCC- + OUT NC (1) 45 1. The upper metallic lid is electrically connected to pin 5 DS6200 - Rev 8 page 2/26 RHF330A Absolute maximum ratings and ...