RP1366

Preliminary RP1366 120mA 6-Channel Charge Pump White LED Driver with Low Dropout Current Source General Description Features The RP1366 is a high performance white LED driver. It integrates a current sources and automatic mode selection charge pump. The part maintains the high efficiency by utilizing an x1/x1.5 fractional charge pump and low dropout current sources. The small equivalent x1 mode open loop resistance and ultra-low dropout voltage of current source extend the operating time of x1 mode and optimize the efficiency of Li-ion battery in white LED applications. The RP1366 supports up to 6 white LEDs and regulates a constant current for uniform intensity. The part implements a 4-bit DAC for brightness control. Users can easily configure the LED current from 1.25mA to 20mA by a serial pulse. The dimming of white LEDs current can be achieved by applying a pulse signal to the EN pin. There are totally 16 steps of current could be set by users. The operating voltage range is 2.8V to 5V. Internal soft start circuitry effectively reduces the in-rush current while both start-up and mode transition. The load is disconnected from VIN while shutdown and the shutdown current is less than 1uA. 85% Average Efficiency Over Battery Life Support up to 6 White LEDs 80mV Typical Current Source Dropout Support up to 120mA Output Current 1% Typical LED Current Accuracy 0.7% Typical LED Current Matching Soft Start Function Auto Charge Pump Mode Selection 1MHz Fixed Frequency Oscilla...