General Purpose RT-iPower
SCHRACK
Power PCB Relay RT Inrush Power
n 1 pole 16A, 1 form A (NO) contact (AgSnO2 or W pre-make contact + AgSnO2)
n Mono- or bistable coil
n 5kV/10mm coil-contact
n Reinforced insulation
n Test tab (manual operator) optional for RTT3T bistable versions
n WG version: product in accordance to IEC60335-1
n RTS3T: Electronic ballast UL508/NEMA 410 rated
n RTSET: 8A Electronic ballast rated
Typical applications LED lighting systems, filament and incandescent lamp loads,.
Power PCB Relay
General Purpose RT-iPower
SCHRACK
Power PCB Relay RT Inrush Power
n 1 pole 16A, 1 form A (NO) contact (AgSnO2 or W pre-make contact + AgSnO2)
n Mono- or bistable coil
n 5kV/10mm coil-contact
n Reinforced insulation
n Test tab (manual operator) optional for RTT3T bistable versions
n WG version: product in accordance to IEC60335-1
n RTS3T: Electronic ballast UL508/NEMA 410 rated
n RTSET: 8A Electronic ballast rated
Typical applications LED lighting systems, filament and incandescent lamp loads, movement detectors, light sensors, intelligent wall sockets, motors (RTS3L), bus system actuators.
Approvals
VDE Cert. No. 40007571,UL E214025, cCSAus 1142018
Technical data of approved types on request.
Contact Data
RT.3T / RTSET
RTS3L
Contact arrangement
1 form A (NO) contact
Rated voltage
250VAC
Max. switching voltage
480VAC
Rated current
16A
Limiting continuous current 16A
20A
Limiting making current,
max. 20ms (incand. lamps) 165A peak
120A peak
max. 200µs
800A peak
Breaking capacity max.
4000VA
Contact material Contact style
W (pre-make cont.) +pAreg-SmnaOk2e contact
AgSnO2 single contact
Frequency of operation, with/without load
360/3600h-1
Operate/release time max., DC coil
10/5ms
Operate/Reset time max., bistable version
10/10ms
Bounce time max.
4ms
Contact ratings
Type Contact
Load
Cycles
IEC 61810
RTS3L A (NO)
20A, 250VAC resistive, 70°C
20x103
RTS3L monostable A (NO) 16A, 250VAC resistive, .