Relay. RTSETF12 Datasheet

RTSETF12 Datasheet PDF


Part

RTSETF12

Description

Power PCB Relay

Manufacture

TE

Page 4 Pages
Datasheet
Download RTSETF12 Datasheet


RTSETF12 Datasheet
General Purpose
RT-iPower
SCHRACK
Power PCB Relay RT Inrush Power
n 1 pole 16A, 1 form A (NO) contact (AgSnO2 or W pre-make contact +
AgSnO2)
n Mono- or bistable coil
n 5kV/10mm coil-contact
n Reinforced insulation
n Test tab (manual operator) optional for RTT3T bistable versions
n WG version: product in accordance to IEC60335-1
n RTS3T: Electronic ballast UL508/NEMA 410 rated
n RTSET: 8A Electronic ballast rated
Typical applications
LED lighting systems, filament and incandescent lamp loads, movement
detectors, light sensors, intelligent wall sockets, motors (RTS3L), bus
system actuators.
Approvals
VDE Cert. No. 40007571,UL E214025, cCSAus 1142018
Technical data of approved types on request.
Contact Data
RT.3T / RTSET
RTS3L
Contact arrangement
1 form A (NO) contact
Rated voltage
250VAC
Max. switching voltage
480VAC
Rated current
16A
Limiting continuous current 16A
20A
Limiting making current,
max. 20ms (incand. lamps) 165A peak
120A peak
max. 200µs
800A peak
Breaking capacity max.
4000VA
Contact material
Contact style
W (pre-make cont.)
+pAreg-SmnaOk2e contact
AgSnO2
single contact
Frequency of operation, with/without load
360/3600h-1
Operate/release time max., DC coil
10/5ms
Operate/Reset time max., bistable version
10/10ms
Bounce time max.
4ms
Contact ratings
Type Contact
Load
Cycles
IEC 61810
RTS3L A (NO)
20A, 250VAC resistive, 70°C
20x103
RTS3L monostable A (NO) 16A, 250VAC resistive, 85°C
100x103
RTS3T A (NO)
16A, 250VAC resistive, 85°C
5x103
In process:
Type Contact
Load
Cycles
RTSET A (NO)
16A, 250VAC resistive, 85°C
5x103
UL 508
RTS3L A (NO)
20A, 250VAC, general purpose, 70°C 20x103
RTS3L A (NO)
16A, 250VAC, resistive, 85°C
50x103
RTS3L A (NO)
TV8, 240VAC, 40°C
25x103
RTS3L A (NO)
1.5hp, 240VAC, 70°C
30x103
RTS3T A (NO)
1200W Tungsten, 120VAC/277VAC,
RTS3T A (NO)
RTS3T A (NO)
60Hz, 50°C
6x103
2A, 480VAC, magnetic ballast, 80°C 10x103 *
2A, 480VAC, electronic ballast, 80°C 10x103*
RTS3T A (NO)
3A, 277VAC, electronic ballast, 80°C 15x103
RTS3T A (NO)
5A, 120VAC, electronic ballast, 80°C 15x103
RTS3T A (NO)
5A, 277VAC, electronic ballast, 85°C 10x103
RTS3T A (NO)
5A, 347VAC, electronic ballast, 105°C
with z.c
10x103*
RTS3T A (NO)
RTS3T A (NO)
5A, 347VAC, magnetic ballast, 105°C 10x103
3A, 480VAC, magnetic ballast, 105°C 10x103*
RTSET A (NO)
16A, 250VAC, general purpose, 85°C 5x103
RTSET A (NO)
8A, 277VAC, electronic ballast, 85°C 6x10³
RTSET A (NO)
5A, 277VAC, electronic ballast, 85°C 10x103
RTSET A (NO)
3A, 277VAC, electronic ballast, 85°C 20x103
RTSET A (NO)
5A, 120VAC, electronic ballast, 85°C
* Special test conditions available on request
20x103
Zb
Contact Data (continued),
Mechanical endurance
DC coil
bistable version
tab manually operated
RT.3T / RTSET
>5x106 ops.
>3x106 / >1x106 ops.
>1x103 ops.
RTS3L
>10x106 ops.
>5x106 ops.
-
Coil Data, monostable DC coil RT.3T RTSET
Coil voltage range
5 to 110VDC
Operative range, IEC 61810
2
Coil insulation system according UL1446
class F
RTS3L
Coil versions, monostable DC coil
Coil
Rated
Operate Release
Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%1) mW
005 5 3.5 0.5 62 403
006 6 4.2 0.6 90 400
009 9 6.3 0.9 203 400
012 12 8.4 1.2 360 400
024 24 16.8 2.4 1440 400
048 48 33.6 4.8 5520 417
060 60 42.0
6.0 85701) 420
110 110 77.0 11.0 288001) 420
1) Coil resistance ±12%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
01-2019, Rev. 0119
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
1

RTSETF12 Datasheet
General Purpose
RT-iPower
Power PCB Relay RT Inrush Power (Continued)
SCHRACK
Coil Data (continued),
bistable coils
1 coil
2 coils
Magnetic system
polarized, bistable
Coil voltage range
3 to 24VDC
Operative range, IEC 61810
2
Limiting voltage, % of rated coil voltage 120%
150%
Min./Max. energization duration 30ms/1min at <10% duty factor
Coil insulation system according UL1446
class F
Coil Data
RT.3T
RTS3L
Coil versions, bistable
Coil
Rated
Set
Reset
Coil Rated coil
code voltage voltage voltage
resistance power
VDC
VDC
VDC
Ω±10%
mW
Coil versions, bistable 1 coil
A03 3 2.1 1.7 21 429
A12 12 8.4 6.6 360 400
A24 24 16.8 13.2 1440 400
Coil versions, bistable 2 coils
F03 3 2.1 1.7 15 600
F12 12 8.4 6.6 240 600
F24 24 16.8 13.2 886 650
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Coil Data
RTSET
Coil versions, bistable
Coil
Rated
Set
Reset
Coil Rated coil
code voltage voltage voltage
resistance power
VDC
VDC
VDC
Ω±10%
mW
Coil versions, bistable 1 coil
A03 3 2.1 1.8 21 429
A12 12 8.4 7.2 360 400
A24 24 16.8 14.4 1440 400
Coil versions, bistable 2 coils
F03 3 2.1 1.8 15 600
F12 12 8.4 7.2 240 600
F24 24 16.8 14.4 886 650
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Bistable coils - operation
Version
1 coil
2 coils
Coil terminals
A1 A2
A1 A3 A2
Operate
+ - + -
Reset
- +
- +
Contact position not defined at delivery
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between contact and coil
Material group of insulation parts
Tracking index of relay base
15205000VVrrmmss
≥10/10mm
IIIa
PTI 250V
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature RT.3T / RTS3L
monostable DC coil
-40 to 105°C
bistable 1 coil
-10 to 105°C
bistable 2 coils
-40 to 105°C
Ambient temperature RTSET
monostable DC coil
-40 to 85°C
bistable 1 coil
-10 to 85°C
bistable 2 coils
-40 to 85°C
RT.3T / RTSET RTS3L
Category of environmental protection
IEC 61810
RTII - flux proof
RTIII - wash tight available upon request
Vibration resistance (functional),
10g 20g
monostable version
Shock resistance (destructive)
100g
Terminal type
PCB-THT, plug-in2)
Weight, without / with test tab
14/16g
14g/-
Resistance to soldering heat THT
IEC 60068-2-20
270°C/10s
RT.3T / RTSET RTS3L
Packaging/unit
without test tab
tube/20 pcs., tube/20 pcs.,
box/500 pcs. box/500 pcs.
with test tab
tray/25 pcs.,
-
box/100 pcs.
-
2) RTT3T or bistable 2 coil version: PCB mounting only. See Accessories.
Accessories RTS.
For details see datasheet
Accessories Industrial Power Relay RT
Socket available for 1 coil version only.
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
2
01-2019, Rev. 0119
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.


Features Datasheet pdf General Purpose RT-iPower SCHRACK Powe r PCB Relay RT Inrush Power n 1 pole 1 6A, 1 form A (NO) contact (AgSnO2 or W pre-make contact + AgSnO2) n Mono- or b istable coil n 5kV/10mm coil-contact n Reinforced insulation n Test tab (manua l operator) optional for RTT3T bistable versions n WG version: product in acco rdance to IEC60335-1 n RTS3T: Electroni c ballast UL508/NEMA 410 rated n RTSET: 8A Electronic ballast rated Typical ap plications LED lighting systems, filame nt and incandescent lamp loads, movemen t detectors, light sensors, intelligent wall sockets, motors (RTS3L), bus syst em actuators. Approvals VDE Cert. N o. 40007571,UL E214025, cCSAus 1142018 Technical data of approved types on re quest. Contact Data RT.3T / RTSE T RTS3L Contact arrangement 1 form A (NO) contact Rated voltage 250VAC Max. switching voltage 480VAC Rated current 16A Limiting continuous cur rent 16A 20A Limiting making current , max. 20ms (incand. lamps) 165A peak 120A peak max. 200µ.
Keywords RTSETF12, datasheet, pdf, TE, Power, PCB, Relay, TSETF12, SETF12, ETF12, RTSETF1, RTSETF, RTSET, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)