S-8264A/B/C Series
www.ablic.com © ABLIC Inc., 2005-2022
BATTERY PROTECTION IC FOR 2-SERIAL TO 4-SERIAL-CELL PACK (SEC...
S-8264A/B/C Series
www.ablic.com © ABLIC Inc., 2005-2022
BATTERY PROTECTION IC FOR 2-SERIAL TO 4-SERIAL-CELL PACK (SECONDARY PROTECTION)
Rev.4.7_00
The S-8264A/B/C Series is used for secondary protection of lithium-ion rechargeable batteries, and incorporates a high-accuracy
voltage detection circuit and a delay circuit. Short-circuiting between cells makes it possible for serial connection of two cells to four cells.
Features
(1) High-accuracy
voltage detection circuit for each cell
Overcharge detection
voltage n (n = 1 to 4)
4.200 V to 4.800 V (in 50 mV steps) Accuracy : ±25 mV (+25°C), Accuracy : ±30 mV (−5°C to +55°C)
Overcharge hysteresis
voltage n (n = 1 to 4)
−0.520 ±0.210 V, −0.390 ±0.160 V, −0.260 ±0.110 V, −0.130 ±0.06 V, None
(2) Delay times for overcharge detection can be set by an internal circuit only (external
capacitors are unnecessary)
(3) Output control function via CTL pin (CTL pin is pulled down internally) (S-8264A Series)
Output control function via CTL pin (CTL pin is pulled up internally) (S-8264C Series)
(4) Output latch function after overcharge detection (S-8264B Series)
(5) Output form and logic
CMOS output active “H”
(6) High withstand
voltage
Absolute maximum rating 26 V
(7) Wide operation
voltage range
3.6 V to 24 V
(8) Wide operation temperature range
−40°C to +85°C
(9) Low current consumption
At 3.5 V for each cell
5.0 μA max. (+25°C)
At 2.3 V for each cell
4.0 μA max. (+25°C)
(10) Lead-free, Sn 100%, haloge...