S-8333 Series
www.ablicinc.com © ABLIC Inc., 2004-2015
STEP-UP, FOR LCD BIAS SUPPLY, 1-CHANNEL, PWM CONTROL SWITCHING ...
S-8333 Series
www.ablicinc.com © ABLIC Inc., 2004-2015
STEP-UP, FOR LCD BIAS SUPPLY, 1-CHANNEL, PWM CONTROL SWITCHING REGULATOR CONTROLLER
Rev.4.2_02
The S-8333 Series is a
CMOS step-up switching regulator which mainly consists of a reference
voltage circuit, an oscillator, an error amplifier, a PWM controller, an under
voltage lockout circuit (UVLO), and a timer latch short-circuit protection circuit. Because its minimum operating
voltage is as low as 1.8 V, this switching regulator is ideal for the power supply of an LCD or for portable systems that operate on a low
voltage. The internal oscillation frequency can be set up to 1.08 MHz, via the resistor connected to the ROSC pin. The maximum duty ratio of PWM control can be controlled by the resistor connected to the RDuty pin. The soft-start function at power application is accomplished by combining the reference
voltage control and maximum duty control methods. Even if the
voltage of the FB pin is retained lower than the referen...