Transceiver. S19235PB11 Datasheet

S19235PB11 Datasheet PDF


Part S19235PB11
Description 16-Bit Transceiver
Feature ( DataSheet : www.DataSheet4U.com ) S19235 OC-192 SONET/SDH/FEC/GbE 16-bit Transceiver and the seri.
Manufacture Applied Micro Circuits
Datasheet
Download S19235PB11 Datasheet


( DataSheet : www.DataSheet4U.com ) S19235 OC-192 SONET/SDH S19235PB11 Datasheet




S19235PB11
( DataSheet : www.DataSheet4U.com )
S19235
OC-192 SONET/SDH/FEC/GbE 16-bit Transceiver
S19235
Description
The S19235 SONET/SDH/FEC and 10
Gigabit Ethernet (GbE) transceiver is
one of the latest additions to AMCC’s
SuperPHYTM product family. The
S19235 device provides fully integrated
serialization/de-serialization capabilities
for low power Intermediate and long
Reach OC-192 applications. The device
performs all necessary parallel-to-serial
and serial-to-parallel functions in
conformance with SONET/SDH and
10GbE transmission standards. The
standard operating range is from
9.953 Gbps to 11.1 Gbps. Figure 1,
System Block Diagram, shows a typical
network application.
Overview
The S19235 can be used to implement
the front end of SONET/SDH/FEC/
10GbE equipment which consists
primarily of the serial transmit interface
and the serial receive interface. The
system timing circuitry consists of a high-
speed phase detector, clock dividers,
and clock distribution. The device utilizes
on-chip clock synthesis PLL components
that allow the use of a slower external
clock reference, 155.52 MHz or
622.08 MHz (or equivalent FEC/10GbE
rate), in support of existing system
clocking schemes. The low-jitter, 16-bit,
Low Voltage Differential Signaling
(LVDS) interfaces guarantee compliance
with the bit-error rate requirements of the
Telecordia and ITU-T standards.
AMCC Suggested Interface Devices
VERRAZANO
(S2509)
Quad STS-48 SONET/SDH/
Digital Wrapper Backplane
SERDES
GANGES
(S19202)
STS-192 POS/ATM SONET/
SDH Mapper
GANGES II
(S19202)
STS-192 POS/ATM SONET/
SDH Mapper
HUDSON
(S19203)
Variable Rate Digital Wrapper
Framer/Deframer,
Performance Monitor, and
FEC Device
MEKONG
(S19204)
STS-192 Pointer Processor
KHATANGA
(S19205)
STS-192c SONET/SDH
Framer/Mapper with
Integrated MAC
S3390
10 Gbps TIA
Product Brief
PB1204_v2.01_10/03/03
– At a Glance –
General Features
• Operational from 9.953 Gbps to
11.1 Gbps
• Low Power (1100 mW Typical)
• 1.2 V and 1.8/2.5/3.3 V Power
Supply
• Built-In Self Test (BIST) Feature
with error counter
• On-chip High-Frequency PLL for
Clock Generation and Clock
Recovery
• 16-bit LVDS Parallel Data Path
• TX and RX Lock Detect Indication
• Serial and Reference Loop
Timing Modes
• Line and Diagnostic Loopback
Mode for Faulty Node
Identification
• Operational Temperature Range
Up to 85°C
• Supports Management Data Bus
for Control I/O
• Complies with OIF SFI-4/
Telecordia/ITU-T Specifications
• 255 PBGA package
Transmitter Features
• Reference frequency of 155.52 or
622.08 MHz (or equivalent FEC/
10GbE rate)
Continued on next page...
16
AMCC
GANGES
HUDSON
MEKONG
KHATANGA
AMCC
S19235
16
www.DataSheet4U.com
LD OTX
ORX
TIA
TIA ORX
OTX
LD
Figure 1. System Block Diagram
Empowering Intelligent Optical Networks
16
AMCC
S19235
16
AMCC
GANGES
HUDSON
MEKONG
KHATANGA
www.DataSheet4U.com
1



S19235PB11
S19235
OC-192 SONET/SDH/FEC/GbE 16-bit Transceiver
The sequence of operations is as
follows:
Transmitter Operations
1. 16-bit parallel input
2. Parallel-to-serial conversion
3. Serial data output
Receiver Operations
1. Serial input to limiting post-amp
2. Clock and Data recovery
3. Serial-to-parallel conversion
4. 16-bit parallel data and clock output
Internal clocking and control functions
are transparent to the user.
Prefix
S – Integrated Circuit
Device
19235
Package
PB11
X
Prefix
XXXXX
Device
XX
Package
Figure 2. S19235 Ordering Information
Product Brief
PB1204_v2.01_10/03/03
Transmitter Features (cont.)
• 155.52 MHz and 622.08 MHz
(or equivalent FEC/10GbE rate)
clock outputs
• Internal, self-initializing FIFO to
decouple transmit clocks
• Programmable TSD output
differential swing (for XFP and
other applications)
Receiver Features
• Recovers clock from 9.953 to
11.1 Gbps
• Adaptive Post-Amplifier offset
adjust for duty cycle distortion
correction
• Post-Amplifier equalization adjust
for 10 GbE jitter tolerance
• Reference frequency of
155.52 MHz (or equivalent FEC/
10GbE rate)
Applications
• SONET/SDH-based transmission
systems
• SONET/SDH modules
• 10GbE based transmission
systems
• Section repeaters
• Add Drop Multiplexers (ADM)
• Broad-band cross-connects
• Fiber Optic Terminators
• Fiber Optic Test Equipment
AMCC reserves the right to make changes to its products, or
to discontinue any product or service without notice, and
advises its customers to obtain the latest version of relevant
information to verify, before placing orders, that the
information being relied upon is current.
AMCC is a registered trademark of Applied Micro Circuits
Corporation. Copyright © 2002 Applied Micro Circuits
Corporation. All Rights Reserved.
Distribute only on a need-to-know basis, and subject to applicable NDA. Not to be disclosed to or used by any other person without prior authorization.
6290 Sequence Drive • San Diego, CA 92121 • Tel: 858 450-9333 • Fax: 858 450-9885 • http://www.amcc.com
Confidential and Proprietary
2 Empowering Intelligent Optical Networks






@ 2014 :: Datasheetspdf.com ::
Semiconductors datasheet search & download site (Privacy Policy & Contact)