S29CD016G

S29CD016G 16 Megabit (512 K x 32-Bit) CMOS 2.5 Volt-only Burst Mode, Dual Boot, Simultaneous Read/Write Flash Memory Data Sheet Distinctive Characteristics Architecture Advantages „ Simultaneous Read/Write operations — Two bank architecture: large bank/ small bank — Data can be read from bank while executing erase/ program functions in other bank — Zero latency between read and write operations User-Defined x32 Data Bus Dual Boot Block — Top and bottom boot sectors in the same device Flexible sector architecture — Eight 8 Kbytes, thirty 64 Kbytes, and eight 8 Kbytes sectors Manufactured on 170 nm process technology SecSi (Secured Silicon) Sector (256 Bytes) — Factory locked and identifiable: 16 bytes for secure, random factory Electronic Serial Number; remainder may be customer data programmed by Spansion™ — Customer lockable: Can be read, programmed, or erased just like other sectors. Once locked, data cannot be changed Programmable Burst interface — Interface to any high performance processor — Modes of Burst Read Operation: — Linear Burst: 4 double words and 8 double words with wrap around Program Operation — Ability to perform synchronous and asynchronous write operations of burst configuration register settings independently Single power supply operation — Optimized for 2.5 to 2.75 volt read, erase, and program operations Compatibility with JEDEC standards (JC42.4) — Software compatible with single-power supply Flash — Backward-compatible with AMD Am29LV and Am29F and F...